Custom flight case for the Nikkor 300mm f/2 rehoused by Century Precision Optics — a legendary fast telephoto that became a cine workhorse after Century added 0.8 mod gears, an iris ring, and standard cine focus throw. The barrel is long and front-heavy, and the rear element sits proud of the mount, so the foam well is contoured to support the lens along its full length with a deeper pocket at the front element and clearance at the rear cap.The interior is single-bay with CNC-cut high-density polyethylene foam, a velvet-soft lid layer to keep the focus and iris rings from chafing, and rebate cuts that let a follow-focus or support bracket stay attached if you ship the lens built up. The shell is a hard ATA-rated case built in North Hollywood — the same enclosure spec used for our rehoused-prime kits, sized to one piece of long glass.Designed and built at 11555 Cantara Street, North Hollywood, CA. To spec a case for a different rehoused barrel or to add a second well for the front diopter, call 818-767-3030.
Case Dimensions
- Interior
- 17.33 × 13 × 9.75 in
- Exterior
- 19.18 × 15.79 × 10.5 in
- Shipping weight
- 12.00 LBS
Interior is the usable space inside the case. Measure your gear at its widest points and allow for foam.
Specifications
- SKU:
- 9022-89
- Weight:
- 12.00 LBS
- Shipping:
- Calculated at Checkout
- Case Type:
- Custom ATA Shipping Case
- Application:
- cine lens transport
- Made in USA:
- Yes
- Industry:
- Film, Television, Broadcast, Rental
- Case Shell:
- Pelican Air 1557
- Gear:
- Cinema Lens
- Fits Manufacturer:
- Nikon
- Protection Rating:
- IP67 Waterproof
- Wheels / Handle:
- No
- Case Construction:
- Injection Molded
- Volume:
- 1.27 ft³
- Lid Depth:
- 2 in
- Bottom Depth:
- 7.7 in
- Weight (empty):
- 6.6 lb
- Weight w/ Custom Foam (est.):
- 7.59 lb
- Max Padlock Shackle:
- 0.31 in
- Materials:
- Body: Proprietary Polypropylene Blend; Latch: ABS; O-Ring: EPDM; Purge Vent: Hi-Flow Gore-Tex 3 Micron Hydrophobic Non-Woven
Will this fit my setup?
Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.
Got it — we’re checking your package.
We have your configuration and the exact build you were looking at. You’ll hear back with a fit confirmation or the modification we’d recommend.
My setup is different
Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.
I need several
Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.
