The URSA Cine Immersive is a fixed dual-lens stereoscopic body built for Apple Immersive Video. The optics are permanently mounted and factory-calibrated, so a knock to the lens block is not a lens swap — it is a trip back to Blackmagic.
What’s in the foam
- Blackmagic URSA Cine Immersive body (10-inch carpet-lined cavity)
- 1× Blackmagic Media Module well
- 10-3/4-inch plate well
- Rods (3-inch channel)
- 9-inch accessory well with plastic partitions; lift-out tray over the accessory section
- Antenna wells
Layout taken from shop drawing 9025-56.
The foam here carries the camera on its chassis rather than loading the lens block, with a rod channel, a plate well, a Media Module well and a partitioned accessory tray for the rest of the kit.
Cut into a Pelican Air 1637 — IP67 watertight and crushproof, with an automatic pressure-equalization valve and recessed twist latches, on built-in wheels with an extending handle. Foamed to order in North Hollywood.
Specifications
| Case shell | Pelican Air 1637 (injection-molded, IP67 watertight, wheeled) |
| Fits | Blackmagic Design URSA Cine Immersive camera body |
| Also carries | Rods, dovetail and additional accessory storage |
| Interior dimensions | 23.43" × 17.55" × 13.25" (59.5 × 44.6 × 33.7 cm) |
| Exterior dimensions | 26.61" × 20.65" × 14.87" (67.6 × 52.5 × 37.8 cm) · lid depth 2.00" |
| Made | Built to order in North Hollywood, California |
Fit & shipping FAQ
How is this different from the ATA version?
This is the lighter watertight build in a wheeled Pelican Air shell. We also make a riveted custom ATA 300 flight case for the same camera when the package ships as freight on a repeating circuit.
Does the foam touch the lens block?
No — the well carries the body on its chassis. On a fixed dual-lens camera that distinction matters, because the optics are not a serviceable swap.
What’s the lead time, and can you rush it?
Every case is built to order and ships in about 14–21 business days. Rush production is available as a premium by quote when a deadline is tight — tell us your date and we’ll price it.
Do you build these for a fleet?
Yes. Outfitting a rental inventory or a multi-camera package is our specialty — standardized, re-orderable builds with optional engraved IDs.
Different accessory load-out, a cage we haven’t listed, or a matched set? Tell us what you run and we cut the foam to match.
Specifications
- SKU:
- 9025-56
- Availability:
- Ships in 14-21 Business Days
- Weight:
- 25.00 LBS
- Shipping:
- Calculated at Checkout
- Case Shell:
- Pelican Air 1637
- Gear:
- Camera
- Fits Manufacturer:
- Blackmagic Design
- Fits Series:
- URSA Cine
- Fits Gear:
- Fits Blackmagic Design URSA Cine
- Case Construction:
- Injection Molded
- Wheels / Handle:
- Yes
- Protection Rating:
- IP67 Waterproof
- Built For:
- Blackmagic URSA Cine Immersive
- Made In:
- Built in North Hollywood, California
Will this fit my setup?
Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.
Got it — we’re checking your package.
We have your configuration and the exact build you were looking at. You’ll hear back with a fit confirmation or the modification we’d recommend.
My setup is different
Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.
I need several
Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.
