The Blackmagic PYXIS 6K and PYXIS 12K share one compact box body, and most PYXIS owners build it out once: a Mid49 cage with battery plate and top handle, an ARRI MAC-1 monitor mount and NRC-2 Teradek holder, 15 mm rods on an ARRI dovetail, and the Blackmagic URSA Cine EVF on its EVF extension. This case is cut for that rigged camera. A built-to-order ATA 300 Category I fabricated flight case with CNC-cut foam that seats the caged body on its base, the EVF and extension in their own cavity, and wells for the rods, dovetail plate, battery plates and accessories.
What’s in the foam
- Blackmagic PYXIS 6K or 12K, rigged (Mid49 cage, top handle, battery plate; ARRI MAC-1 and NRC-2), 10.5-inch cavity
- Blackmagic URSA Cine EVF on its extension, 9.5-inch carpet-lined well
- Rods (3-inch channel) and ARRI dovetail (11.5-inch well)
- Two 12-inch deep wells, one with a cover flap
- Four-slot divided accessory bay
Layout taken from shop drawing 4824.
Camera and rig not included. The layout is confirmed on your order drawing before the case is cut.
Specifications
| Fits | Blackmagic PYXIS 6K or PYXIS 12K, rigged (Mid49 cage, top handle, battery plate, ARRI MAC-1 and NRC-2, rods, dovetail) |
| Viewfinder | Blackmagic URSA Cine EVF with URSA Cine EVF Extension, own cavity |
| Rods | 15–18 inch rods and ARRI dovetail in their own wells |
| Exterior dimensions | 20-1/2 × 13-1/2 × 17-1/4 in (from the shop drawing); 2-inch ELE lid |
| Construction | ATA 300 Category I · fabricated laminate shell · CNC-cut polyethylene foam · built to order in North Hollywood |
| Lead time | 14–21 business days; rush by quote |
Fit & shipping FAQ
My cage is not a Mid49.
Request a quote from this page with the cage model and we cut to it; the drawing stays on file for reorders.
Do you build these for a fleet?
Yes. Rental houses standardize on one layout and reorder it with engraved IDs; the drawing stays on file. Request a fleet quote and we’ll spec the run.
Different rig, extra bodies, or a fleet? Request a quote or contact the shop.
Related: Blackmagic camera cases · All Blackmagic Design fits
Case Dimensions
- Exterior
- 20.5 × 13.5 × 17.25 in
- Shipping weight
- 25.00 LBS
Specifications
- SKU:
- 4824
- Availability:
- Ships in 14-21 Business Days
- Weight:
- 25.00 LBS
- Shipping:
- Calculated at Checkout
- Gear:
- Camera
- Fits Manufacturer:
- Blackmagic Design
- Fits Gear:
- Fits Blackmagic PYXIS 6K and PYXIS 12K
- Fits Series:
- PYXIS
- Protection Rating:
- ATA 300 Category 1
- Wheels / Handle:
- No
- Built For:
- Blackmagic PYXIS 6K / 12K
- Made In:
- Built in North Hollywood, California
- Case Construction:
- ATA 300 Case
- Lead Time:
- 14–21 business days
Will this fit my setup?
Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.
Got it — we’re checking your package.
We have your configuration and the exact build you were looking at. You’ll hear back with a fit confirmation or the modification we’d recommend.
My setup is different
Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.
I need several
Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.
