A custom Pelican case for the SanDisk Professional G-RAID Shuttle 8 in the 160 TB configuration — the 8-bay desktop / portable RAID used for offload-and-deliver workflows between set and post. The G-RAID Shuttle 8 sits in a CNC-cut foam well contoured around its rectangular chassis, with cutouts that leave the rear I/O panel (Thunderbolt 3, USB-C, RJ-45, dual PSU inputs) clear so the unit can be powered up from inside the case if needed.
Adjacent wells carry the supplied dual AC power bricks, the IEC power cables, the Thunderbolt cables, and a backup RJ-45 patch lead. Pelican Protector-class shell with retractable handle, two-wheel cart roll, automatic pressure-equalization valve, recessed dish latches, and stainless hardware — the pressure valve matters because the Shuttle 8's PSUs vent hot air and the case needs to equalize during temperature swings in transit.
Designed and CNC-cut at 11555 Cantara Street in our North Hollywood, California workshop. Call 818-767-3030 to spec the G-RAID transport case.
Specifications
- External Dimensions
- 21.2 × 16 × 10.6 in
- Internal Dimensions
- 20 × 14 × 10 in
- Lid Depth
- 2 in
- Bottom Depth
- 8 in
- Empty Weight
- 12.5 lb
- Weight w/ Custom Foam (est.)
- 15.63 lb
- Interior Volume
- 1.62 ft³
- Construction
- Injection Molded
- Material
- Body: Injection Molded HPX high performance resin; Latch: Valox - Polybutylene Terephthalate (PBT); O-Ring: EPDM; Hardware: Stainless Steel; Purge Vent: Gortex membrane
- Shell / Case Model
- Pelican Storm iM2620
- Wheels / Handle
- Yes
- Max Padlock Shackle
- 0.38 in
- Protection Rating
- IP67
Product details
- SKU:
- 9022-73
- Shipping:
- Calculated at Checkout
- Fits Manufacturer:
- Pelican
Will this fit my setup?
Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.
Got it — we’re checking your package.
We have your configuration and the exact build you were looking at. You’ll hear back with a fit confirmation or the modification we’d recommend.
My setup is different
Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.
I need several
Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.
