Eight 3-1/2-inch holes on a 4x2 layout, 23″ × 13″ × 14″ outside. If the barrel clears 3-1/2 inches (89mm), it drops in. This is not a case cut for one lens set — it is built to a hole size, and 22 lens series share this one, so it still fits when the glass in the fleet changes.
Pre-made in black and held in stock. A case cut to one set is worth nothing the day you change glass; this one survives a fleet change, which is why it holds its value on the rental shelf. Ordered before the carrier cut-off, it goes out the same day rather than in three weeks.
Specifications
| Hole count | 8 |
| Hole size | 3-1/2″ (89mm) |
| Layout | 4x2 vertical |
| Exterior dimensions | 23″ W × 13″ D × 14″ H |
| Interior height | 14″ — clears any prime up to 11-1/2″ long |
| Foam spacing | 2″ to the wall, 1-1/2″ between lenses |
| Construction | ATA 300 hand-built flight case · 0.25″ panels · CNC-cut foam |
| Fits | 22 confirmed lens series at this hole size |
| Lead time | In stock in black — ships the same day |
What is in the box
- The case, with 8 vertical holes at 3-1/2 inches
- CNC-cut foam insert with finger grips at 45 degrees on every hole
- A 1-3/4″ hard riser per hole that cups the PL mount
- Soft foam levelling circles to bring a mixed set up to the lid
- A 1-5/8″ desiccant holder (desiccant not included)
- Full-foam ELE lid, no holes
Fit & shipping FAQ
Will my set fit?
If every barrel clears 3-1/2 inches (89mm) and no lens is longer than 11-1/2 inches, yes. 22 series are already confirmed on this hole size — look yours up in the fit checker.
What if one lens is longer than the rest?
The interior is 14 inches tall at every hole, so a mixed set is fine. Soft foam circles under the shorter lenses bring them up until the lid foam makes contact on all of them.
What comes in the box?
The case, the CNC-cut foam insert, a full-foam lid, a hard riser for every hole, a bag of soft levelling circles, and the desiccant holder. Desiccant itself is not included.
Can you cut it to my exact set instead?
Yes. That is a made-to-order build — 14 to 21 business days, and the quote comes with a dimensioned drawing before anything is cut. Start here.
Does it really ship the same day?
On stock configurations in black, ordered before the carrier cut-off, yes. That is the whole point of pre-making these instead of cutting each one to order.
Glass that needs a bigger hole than 5 inches? ARRI Signature, Cooke S8/i, Cooke Anamorphic/i and most rehoused vintage are cut to fit — 14 to 21 business days with a dimensioned drawing in the quote. Request one or call the shop at 818-767-3030.
Other hole sizes in this line: all Universal Vertical cases.
Find more cases for your gear: look up your lens series.
Specifications
- 4900-V8-350
- Availability:
- In Stock — Ships Same Day
- Weight:
- 22.00 LBS
- Shipping:
- Calculated at Checkout
- Exterior Dimensions:
- 23 x 13 x 14 in
- Hole Size:
- 3-1/2 in (89mm)
- Hole Count:
- 8
- Interior Height:
- 14 in
- Fits Lens Series:
- 22 confirmed series
- Case Construction:
- ATA 300, 0.25 in panels
- Protection Rating:
- Standard (No Rating)
- Lead Time:
- 7-10 business days
- Made In:
- North Hollywood, California, USA
- Model:
- UV-8 · 3-1/2″
- Stock Status:
- In Stock
- Fits Statement:
- Any lens whose barrel clears the hole size shown above and is no longer than 11-1/2 inches. Confirm your series in the fit checker.
