null
Skip to main content
ATA 300 Category I Flight-rated construction
Made in LA Los Angeles, CA
Built for the kit Accessories, AKS, transport state
Rental-house fleet Standardized, re-orderable, engraved
Trusted 100+ Years Protecting gear for generations
Representative Innerspace ATA reference-monitor build (BVM-HX310 build shown); the HX3110 build is cut to the HX3110 chassis and your mount. Monitor not included.
View Larger Image

Sony BVM-HX3110 30.5-inch 4K TRIMASTER HX Transport Case — Face-In Foam, Yoke or Stand, ATA 300

Model 3972-HX3110

Innerspace Cases

$1,599.99
Built to Order Ships in 14-21 Business Days
Fabricated ATA
Fits
Sony BVM-HX3110
Construction
Fabricated ATA
Interior
Custom Foam System
Protection
ATA 300 Category I
Made
Built in North Hollywood, California
Fabricated ATA 300 Category I flight case built around the Sony BVM-HX3110, face-in on a contoured pad, mount in its own cavity, power and cable wells. Foam is cut to the selected mount (stand / yoke / bare).
Standard Build Black case · matching lid · nickel hardware · twist latches · black foam

One click sets the house-standard finish. Fit and interior don’t change — everything below is cosmetic.

Customize the Build

Case finish & identification — cosmetic only. The fit above stays the same.

Mount Required
Hood Required
Case Color (Required)
Lid Stripe Required
Lid Stripe (Required)
Body —
Lid stripe matches body
Hardware Color Required
Hardware Color (Required)
Latches Required
Foam Color Required

Black top and bottom is standard. Any other combination adds $35.

Lid Branding Optional
Adding to cart… The item has been added

Not sure this is the right system for you? Talk to a case specialist.

Open Full Image
  • ATA-grade construction
  • Made in North Hollywood, CA
  • Built to order
  • Spec questions answered same-day
Write a Review

The Sony BVM-HX3110 is a 30.5-inch 4K HDR TRIMASTER HX master monitor, Sony’s flagship reference display since 2023 and the successor to the BVM-HX310, and it is the most expensive piece of glass on the truck, the kind of panel that rides between the rental house, the DIT cart and the grading suite on somebody else’s truck. Sony ships it in one-trip cardboard. This is the transport case: a built-to-order ATA 300 Category I fabricated flight case with CNC-cut foam that seats the BVM-HX3110 face-in on a contoured pad, suspended off the case walls, with the mount you select in its own cavity and separate wells for the power supply and cabling. Foam is cut to the HX3110 chassis, not the HX310’s; the two are siblings, not the same case.

Pick the mount and hood above. A panel that travels on its Sony stand, one that keeps an Oppenheimer or OppCam yoke bolted on, and a bare panel going to a VESA arm or rack rails are three different cavities. The foam is cut to the one you select, and the sun hood gets its own pocket when you pack one. Monitor not included.

Specifications

FitsSony BVM-HX3110, 30.5-inch
Mount optionsSony stand (default) · yoke stays on (Oppenheimer / OppCam / Matthews) · bare panel, VESA or rack
HoodNo hood · sun hood packed in its own pocket
Exterior dimensionsSized to the selected mount; confirmed on your order drawing before the case is cut
ConstructionATA 300 Category I · fabricated laminate shell · CNC-cut polyethylene foam · built to order in North Hollywood
Lead time14–21 business days; rush by quote

Fit & shipping FAQ

Does the yoke have to come off?

No. Select “yoke stays on” and the cavity is cut around the panel with the yoke bolted to it, so the monitor goes from case to stand without tools. Select the Sony stand or bare panel and the cavity is cut for that instead. A case cut for one will not seat the other.

Where does the sun hood go?

In its own pocket, folded, when you select it above. Hoods that ride loose against the panel are how bezels get scratched.

Can it check as airline baggage or ship by courier?

The shell is built to ATA 300 Category I for checked air travel, courier and freight. Cases in this size class run over the 62-inch linear checked-bag limit, so most clients fly them as oversized checked baggage or send them by courier.

Do you build these for a fleet?

Yes. Rental houses standardize on one layout and reorder it with engraved IDs; the drawing stays on file. Request a fleet quote and we’ll spec the run.

Fleeting Sony reference monitors? Request a quote or contact the shop.

Related: Sony monitor cases · Sony production monitors we build for · All Sony fits

Specifications
SKU:
3972-HX3110
Availability:
Ships in 14-21 Business Days
Weight:
45.00 LBS
Shipping:
Calculated at Checkout

Case specifications

Exterior dimensions
Sized to the selected mount (confirmed on order drawing)
Weight (empty)
~45 lb (est.)
Construction
Fabricated ATA
Interior
Custom Foam System
Wheels
No
Shipping weight
45.00 LBS
SKU
3972-HX3110

What it fits

Monitor manufacturer
Sony
Monitor family
BVM
Monitor model
BVM-HX3110
Monitor size
25-32 in
Monitors carried
Single

Fit is confirmed against the exact monitor and the accessories you travel with. If your package differs, use Will this fit my setup? below and we will check it before you order.

Build & shipping

Made
Built in North Hollywood, California

Will this fit my setup?

Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.

We reply with a real answer, usually same business day.

My setup is different

Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.

I need several

Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.

!